"Boeing" Open Hole Compression fixture to ASTM D6484M (Metric units system).
CP113779 | "Boeing" Open Hole Compression Fixture
Fixture for Boeing open hole compression test to ASTM D6484M (Metric units system).
Suitable for shear loading (procedure A) by mounting in hydraulic grips, and end loading (procedure B) when used with 150 mm (6 in) diameter compression platens and support plates CP113780.
Provides access to the gauge section for strain measurement.
Max Load: 200KN (20,000 kgf, 45,000 lbf)
Temperature : -70° to 250° C (-94 to +482 °F)
Note: Compression platens and support plates CP113780 are not included in this quote.
Includes storage case.
|Accessory Height||300 mm (11.8 in)|
|Accessory Weight||7 kg (15 lb)|
|Accessory Width||80 mm (3.1 in)|
|Capacity||200 kN (45,000 lbf)|
|Lower Fitting||Requires platen 100 mm (4 in) or larger|
|Temperature Rating||-70 to +250°C (-94 to +482°F)|
|Testing Standards||ASTM D6484M|
|Upper Fitting||Requires platen 100 mm (4 in) or larger|
Composite Test Fixtures Open-Hole Compression testing is preformed on multi-directional polymer matrix composite laminates reinforced with high modulus fibers.
- 174.7 KB